T-POD Pelvic Stabilization Device: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 3: | Line 3: | ||
====Indications==== | ====Indications==== | ||
*Suspected or proven unstable pelvic fracture demonstrated on radiograph | |||
*Mechanism of injury consistent with possible pelvic fracture with physical exam | |||
**Abrasions and contusions around the pelvic area | |||
**Hematoma above the inguinal ligament, to the scrotum, or the thigh | |||
*Mechanism of injury consistent with possible pelvic fracture with hemorrhagic shock without another source of hemorrhage. | |||
Line 13: | Line 13: | ||
====Application Procedure==== | ====Application Procedure==== | ||
*Slide Belt under supine patient and into position under the pelvis. | |||
*Trim the Belt, leaving a 6-8” gap over the center of the pelvis. As an alternative, the belt can also be folded under itself, do not roll it, there is a maximum of 2 layers of material | |||
*Apply Velcro-backed Mechanical Advantage Pulley System to each side of the trimmed Belt. | |||
*Slowly draw tension on the Pull Tab, creating simultaneous, circumferential compression. | |||
*Secure the Velcro-backed Pull Tab to the Belt. | |||
*Record the date and time of application on the space provided. Re-evaluate distal pulse, motor, and sensation (PMS) of both extremities regularly and document in the PCR. | |||
====Special Considerations==== | ====Special Considerations==== | ||
*If an obese patient requires T-POD®, two belts may be affixed together using one power unit as an extender and the other as the pulley | |||
*Children less than 50 lbs. (23 Kg) may be too small to obtain the 6-inch gap needed for closure. If the ends of the T-POD® overlap, it will not be effective in stabilizing the pelvis. | |||
*The T-POD® can be released to check for skin integrity and provide wound care, as necessary. For long transports, the T-POD® should be released every twelve (12) hours to check for skin integrity and reapplied as soon as possible. |
Revision as of 18:31, 15 September 2023
Procedure Guidelines
9.40 T-POD Pelvic Stabilization Device
Indications
- Suspected or proven unstable pelvic fracture demonstrated on radiograph
- Mechanism of injury consistent with possible pelvic fracture with physical exam
- Abrasions and contusions around the pelvic area
- Hematoma above the inguinal ligament, to the scrotum, or the thigh
- Mechanism of injury consistent with possible pelvic fracture with hemorrhagic shock without another source of hemorrhage.
For suspected hip fracture (indicated by pain, shortening and/or rotation of the affected extremity), splint with padding to protect the hip and comfort the patient. The use of a T-Pod is not indicated for patients with a suspected hip fracture.
Application Procedure
- Slide Belt under supine patient and into position under the pelvis.
- Trim the Belt, leaving a 6-8” gap over the center of the pelvis. As an alternative, the belt can also be folded under itself, do not roll it, there is a maximum of 2 layers of material
- Apply Velcro-backed Mechanical Advantage Pulley System to each side of the trimmed Belt.
- Slowly draw tension on the Pull Tab, creating simultaneous, circumferential compression.
- Secure the Velcro-backed Pull Tab to the Belt.
- Record the date and time of application on the space provided. Re-evaluate distal pulse, motor, and sensation (PMS) of both extremities regularly and document in the PCR.
Special Considerations
- If an obese patient requires T-POD®, two belts may be affixed together using one power unit as an extender and the other as the pulley
- Children less than 50 lbs. (23 Kg) may be too small to obtain the 6-inch gap needed for closure. If the ends of the T-POD® overlap, it will not be effective in stabilizing the pelvis.
- The T-POD® can be released to check for skin integrity and provide wound care, as necessary. For long transports, the T-POD® should be released every twelve (12) hours to check for skin integrity and reapplied as soon as possible.